Quick answer
Commercial Door Hardware Repair: Repairing commercial handles, hinges, closers, locks, latches, strikes, pivots and door frames. Big Daddy Car Key Replacement provides commercial door hardware repair service in Glendale as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Commercial Door Hardware Repair
- Area
- Glendale, Los Angeles County, CA (91201, 91202, 91203, 91204, 91205, 91206, 91207, 91208)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our commercial door hardware repair service
- Who we help in Glendale
- When you need commercial door hardware repair service
- Commercial Door Hardware Repair across Glendale
- What happens when you call
- Common situations in Glendale
- Equipment and hardware on the van
- Trade terms explained
- What affects the cost of commercial door hardware repair service
- Why Glendale customers choose Big Daddy
- Advice worth knowing
- Why this is a job for a locksmith
- What we commit to
- Choosing a locksmith: a short checklist
- What to have ready when you call
- Aftercare and records
- Related locksmith services in Glendale
- Commercial Door Hardware Repair near Glendale
- Commercial Door Hardware Repair in Glendale: frequently asked questions
About our commercial door hardware repair service
Repairing commercial handles, hinges, closers, locks, latches, strikes, pivots and door frames. A commercial door is a system. When pivots or continuous hinges wear, the door drops, the latch misses the strike, the closer strains and the lock gets blamed. We diagnose the whole opening and repair the root cause, whether that is a pivot, a hinge, a threshold, a strike or the frame itself.

Commercial lock problems cost money by the hour: a store that cannot open, a back door that will not secure, keys in the pockets of former staff. For commercial door hardware repair service in Glendale, we send technicians who work with commercial-grade hardware every day and who understand fire, egress and accessibility requirements.
Who we help in Glendale
Our commercial customers in Glendale include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Glendale.
When you need commercial door hardware repair service
If any of the following sounds familiar, commercial door hardware repair service is likely what you need:
- The door drags on the threshold or frame
- A gap has opened at the latch side
- Pull handles or push bars are loose
- The door needs a shoulder to open or close
Commercial Door Hardware Repair across Glendale
Located in Los Angeles County, Glendale is an incorporated city within our Burbank, Glendale & Foothills service area. We cover every part of Glendale, including Downtown Glendale, Adams Hill, Rossmoyne, Verdugo Woodlands, Montrose, Sparr Heights, Glenoaks Canyon, and Chevy Chase Canyon. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91201, 91202, 91203, 91204, 91205, 91206, 91207, and 91208 ZIP codes.
Glendale is one of the county’s largest cities, with high-rise offices and condos downtown, thousands of apartment units, and historic Spanish and Tudor homes in the hills, all with very different lock needs.
If you are out and about near The Americana at Brand, Glendale Galleria, Brand Library & Park, the Alex Theatre, or Glendale Community College, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Glendale follows SR-134, SR-2, I-5, Brand Boulevard, Colorado Street, and Glenoaks Boulevard. You get a realistic arrival estimate when you call.
What happens when you call
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Glendale
- A manager is let go and returns only some of the keys issued.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A closer has failed and the front door slams hard enough to rattle the glass.
- The storefront door will not latch and the shop cannot be left for the night.
- The back door shows pry marks around the latch after the weekend.
Equipment and hardware on the van
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Trade terms explained
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
What affects the cost of commercial door hardware repair service
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Glendale customers choose Big Daddy
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Glendale.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Advice worth knowing
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Consider keypad or card access for doors with frequent staff turnover.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Give each employee access only to the doors their job requires.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
Why this is a job for a locksmith
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
What we commit to
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Glendale
Customers who need commercial door hardware repair service often ask about these as well. Each can usually be handled in the same visit to Glendale.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- Office Building Locksmith
Master key systems, access control, door hardware, lock repairs and tenant suite rekeys.
- Rim Cylinder Replacement
Replacing rim cylinders used with panic bars, exit devices and commercial doors.
- High-Security Commercial Locks
Installing restricted keyway locks, pick-resistant locks, drill-resistant locks and bump-resistant lock systems.
- Exit Device Installation
Installing code-compliant exit devices for commercial emergency exits.
- Restaurant Locksmith Service
Lockouts, rekeys, panic bars, door closers, storefront locks and access control for restaurants.
- Desk Lock Repair
Repairing locks for desks, drawers and office furniture.
- Commercial Lock Rekeying
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns.
- IC Core Lock Systems
Installing and rekeying interchangeable core lock systems for commercial properties.
- Office Lockout Service
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Lock Installation
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
Commercial Door Hardware Repair near Glendale
We provide the same commercial door hardware repair service in the communities around Glendale. See the main commercial door hardware repair page or the full list of service areas.
- Commercial Door Hardware Repair in Burbank
- Commercial Door Hardware Repair in La Cañada Flintridge
- Commercial Door Hardware Repair in Toluca Lake
- Commercial Door Hardware Repair in South Pasadena
- Commercial Door Hardware Repair in Pasadena
- Commercial Door Hardware Repair in West Hollywood
- Commercial Door Hardware Repair in Studio City
- Commercial Door Hardware Repair in Altadena
- Commercial Door Hardware Repair in North Hollywood
- Commercial Door Hardware Repair in Alhambra
- Commercial Door Hardware Repair in Valley Village
- Commercial Door Hardware Repair in Sun Valley
Commercial Door Hardware Repair in Glendale: frequently asked questions
Why is my commercial door dragging on the ground?
The top pivot or hinge has worn or loosened, letting the door sag. Replacing or adjusting the pivot set or installing a continuous hinge lifts the door back into position and usually cures latch problems too.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Can you work outside our business hours in Glendale?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Are you open 24 hours in Glendale?
Yes. We take calls and dispatch to Glendale 24 hours a day, including weekends and holidays.
Can you make car keys in Glendale?
Yes. We cut and program car keys on site anywhere in Glendale, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Do you have a locksmith shop in Glendale?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Glendale and the rest of the Burbank, Glendale & Foothills area. All work is done at your location.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
