Quick answer
Door Reinforcement: Adding security plates, reinforced strike plates, latch guards and door wrap plates. Big Daddy Car Key Replacement provides door reinforcement service in Reseda as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Door Reinforcement
- Area
- Reseda, Los Angeles County, CA (91335)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Door Hardware Services
- Phone
- (562) 550-7206
On this page
- About our door reinforcement service
- Who we help in Reseda
- When you need door reinforcement service
- Door Reinforcement across Reseda
- Our door reinforcement process, step by step
- Typical calls we receive
- Tools, parts and hardware we carry
- Terms worth knowing
- What affects the cost of door reinforcement service
- What you can expect from us
- Tips to avoid problems
- Doing it yourself versus calling a professional
- What we commit to
- Questions to ask any locksmith
- How to prepare for the visit
- After the visit
- Related locksmith services in Reseda
- Door Reinforcement near Reseda
- Door Reinforcement in Reseda: frequently asked questions
About our door reinforcement service
Adding security plates, reinforced strike plates, latch guards and door wrap plates. Doors are usually defeated by kicking, which splits the jamb or the door edge around the lock. Reinforcement spreads that force: a long strike plate screwed into the wall studs, a jamb reinforcement kit, a wrap-around plate on the door edge, and three-inch screws in the hinges.

Doors in Reseda deal with settling foundations, seasonal humidity, sun-baked frames and years of daily use. Our door reinforcement service corrects the misalignment, wear and loose hardware that make doors hard to close or lock, and adds reinforcement where a door is weaker than it should be.
Who we help in Reseda
Door hardware calls in Reseda come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.
This service is part of our door hardware services in Reseda.
When you need door reinforcement service
If any of the following sounds familiar, door reinforcement service is likely what you need:
- Your door frame is soft wood with a small strike
- You want kick-in resistance without a new door
- A previous break-in cracked the door edge
- The door is hollow-core or lightly built
Door Reinforcement across Reseda
Located in Los Angeles County, Reseda is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. Customers anywhere in Reseda, including the Sherman Way commercial strip, the Reseda Boulevard corridor, and the blocks around Reseda Park, can have a mobile technician sent directly to them. We serve the 91335 ZIP code.
Reseda is a classic Valley grid of 1950s tract houses, garden apartments and strip-mall storefronts, where worn-out original locks, storefront cylinders and older ignition problems are common calls.
People call us from all over Reseda, including the areas around Reseda Park, the Sherman Way business district, the historic Reseda Theatre, and the Los Angeles River greenway. A landmark or cross street helps the technician reach you quickly. Technicians usually reach Reseda by US-101, Reseda Boulevard, Sherman Way, Victory Boulevard, Vanowen Street, and Tampa Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Our door reinforcement process, step by step
Describe the symptom
Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.
Inspect the whole opening
The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.
Find the root cause
Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.
Agree the repair and price
You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.
Make the repair
Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.
Test under real conditions
The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- The back door swings outward and its latch is visible through the gap.
- The door drifts open by itself because the latch no longer catches.
- A previous break-in left the jamb cracked around the strike.
- A latch has jammed and someone is stuck in a room.
- The top corner of the door rubs the frame and the paint is wearing through.
- The deadbolt only turns if you pull the door hard toward you.
Tools, parts and hardware we carry
For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.
Terms worth knowing
- Bolt throw
- How far a deadbolt extends from the door edge. One inch is the standard for security.
- Latch guard
- A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
- Jamb
- The vertical part of the door frame that carries the hinges on one side and the strike on the other.
- Door wrap
- A metal plate that wraps the door edge around the lock to reinforce it against splitting.
- Strike plate
- The plate on the frame that receives the latch or bolt.
- Latch
- The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
- Deadlatch
- A latch with a small plunger that stops it being pushed back with a card once the door is closed.
- Shim
- A thin spacer placed behind a hinge to adjust how the door sits in its frame.
What affects the cost of door reinforcement service
- Extent of damage
- A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
- Reinforcement level
- A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
- Number of doors
- Several doors in one visit cost less per door than separate calls.
- Adjustment or replacement
- Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
- Hardware quality
- Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
- Door and frame material
- Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Reseda.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Tips to avoid problems
- Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
- Replace hollow-core exterior doors. No lock makes a weak door strong.
- Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
- Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
- Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
- Out-swinging doors should have hinges with non-removable pins or security studs.
- Lubricate latches and hinges lightly once a year, and wipe away the excess.
- If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
Doing it yourself versus calling a professional
Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.
What we commit to
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Reseda
Customers who need door reinforcement service often ask about these as well. Each can usually be handled in the same visit to Reseda.
- Latch Guard Installation
Installing latch guards to protect against forced entry.
- Door Alignment for Locks
Fixing lock issues caused by sagging doors, shifted frames or misalignment.
- Door Lock Repair
Repairing lock cylinders, latches, strikes and internal mechanisms.
- Door Hardware Repair
Repairing the locks, latches, strikes, hinges and closers that make a door open, close and secure properly.
- Hinge Adjustment
Adjusting or replacing hinges so doors close correctly.
- Strike Plate Adjustment
Adjusting strike plates so doors latch and lock properly.
- Door Guard Installation
Installing flip guards, swing guards or security latches.
- Security Strike Plate Installation
Installing stronger strike plates with longer screws for added protection.
- Door Chain Installation
Installing door chains or secondary security locks.
- Door Viewer & Peephole Installation
Installing peepholes or door viewers for added safety.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Car Lockout
Unlocking vehicles when keys are locked inside.
Door Reinforcement near Reseda
We provide the same door reinforcement service in the communities around Reseda. See the main door reinforcement page or the full list of service areas.
- Door Reinforcement in Northridge
- Door Reinforcement in Lake Balboa
- Door Reinforcement in Winnetka
- Door Reinforcement in Tarzana
- Door Reinforcement in Canoga Park
- Door Reinforcement in Encino
- Door Reinforcement in North Hills
- Door Reinforcement in Woodland Hills
- Door Reinforcement in Van Nuys
- Door Reinforcement in Panorama City
- Door Reinforcement in Chatsworth
- Door Reinforcement in Mission Hills
Door Reinforcement in Reseda: frequently asked questions
How do I stop my door from being kicked in?
Reinforce the three weak points: the strike and jamb, the door edge around the lock, and the hinges. Long screws into the framing and steel reinforcement plates make a standard door dramatically harder to force.
Will the repair damage my door or paint?
We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.
Can you repair a door frame after a break-in?
Yes. We fit jamb repair and reinforcement kits that restore strength to a split frame, and replace damaged locks and strikes in the same visit.
Do you work on commercial doors as well?
Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.
Can door problems be fixed without replacing the lock?
Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.
How can I make my door harder to kick in?
Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.
Why do I have to push my door to lock it in Reseda?
The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.
Why does my door lock fine in summer but not winter?
Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.
Can you make car keys in Reseda?
Yes. We cut and program car keys on site anywhere in Reseda, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Do you have a locksmith shop in Reseda?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Reseda and the rest of the San Fernando Valley area. All work is done at your location.
Which parts of Reseda do you serve?
All of Reseda, including the Sherman Way commercial strip, the Reseda Boulevard corridor, and the blocks around Reseda Park, and addresses in ZIP code 91335.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
