Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Security Strike Plate Installation in South Pasadena, CA

Big Daddy Car Key Replacement provides security strike plate installation service throughout South Pasadena. We come to you at any hour with the tools and parts to finish the job on site. Installing stronger strike plates with longer screws for added protection.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Security Strike Plate Installation in South Pasadena, CA by Big Daddy Car Key Replacement

Quick answer

Security Strike Plate Installation: Installing stronger strike plates with longer screws for added protection. Big Daddy Car Key Replacement provides security strike plate installation service in South Pasadena as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Security Strike Plate Installation
Area
South Pasadena, Los Angeles County, CA (91030)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Door Hardware Services
Phone
(562) 550-7206
On this page

What security strike plate installation means

Installing stronger strike plates with longer screws for added protection. The small strike plate supplied with most locks is held by short screws into thin door-jamb trim. A security strike is longer, made of heavier steel, and fastened with three-inch screws that reach the wall framing, so a kick has to break the stud, not just the trim.

Security Strike Plate Installation in South Pasadena, CA by Big Daddy Car Key Replacement
Security Strike Plate Installation in South Pasadena: mobile service, carried out at your location.

A lock can only do its job if the door around it works. Hinges, latches, strike plates and frames move over time, and the lock is usually blamed for problems that begin elsewhere. Our security strike plate installation service in South Pasadena looks at the whole opening and fixes the cause, so the door closes with a push and locks without force.

Customers we serve in South Pasadena

Door hardware calls in South Pasadena come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.

This service is part of our door hardware services in South Pasadena.

Reasons to call for security strike plate installation service

People in South Pasadena usually call us for security strike plate installation service in situations like these:

  • Your strike plate is held by short screws
  • The jamb is cracked or has been repaired before
  • You are installing a new deadbolt
  • You want an inexpensive, meaningful upgrade

Security Strike Plate Installation across South Pasadena

Located in Los Angeles County, South Pasadena is an incorporated city within our San Gabriel Valley service area. Customers anywhere in South Pasadena, including the Mission West district, the Fair Oaks corridor, Monterey Hills, the Huntington Drive corridor, and the Arroyo edge, can have a mobile technician sent directly to them. Service is available throughout ZIP code 91030.

South Pasadena is prized for tree-lined streets of Craftsman and Victorian homes, where keeping original doors and glass knobs while adding real security is a frequent and delicate request.

Whether you are at home, at work, or stuck near the Mission Street district, the South Pasadena Metro station, the Fair Oaks Pharmacy and Soda Fountain, the Rialto Theatre, or Garfield Park, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach South Pasadena by SR-110, Fair Oaks Avenue, Mission Street, Huntington Drive, Fremont Avenue, and Monterey Road. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.

Our security strike plate installation process, step by step

  1. Describe the symptom

    Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.

  2. Inspect the whole opening

    The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.

  3. Find the root cause

    Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.

  4. Agree the repair and price

    You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.

  5. Make the repair

    Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.

  6. Test under real conditions

    The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.

When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Locksmith providing security strike plate installation service in South Pasadena, California
Our technicians work from fully equipped vans throughout South Pasadena.

Typical calls we receive

  • The back door swings outward and its latch is visible through the gap.
  • The deadbolt only turns if you pull the door hard toward you.
  • A latch has jammed and someone is stuck in a room.
  • The door drifts open by itself because the latch no longer catches.
  • The top corner of the door rubs the frame and the paint is wearing through.
  • A previous break-in left the jamb cracked around the strike.

Tools, parts and hardware we carry

For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.

A short glossary

Strike plate
The plate on the frame that receives the latch or bolt.
Jamb
The vertical part of the door frame that carries the hinges on one side and the strike on the other.
Latch guard
A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
Door wrap
A metal plate that wraps the door edge around the lock to reinforce it against splitting.
Bolt throw
How far a deadbolt extends from the door edge. One inch is the standard for security.
Deadlatch
A latch with a small plunger that stops it being pushed back with a card once the door is closed.
Latch
The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
Shim
A thin spacer placed behind a hinge to adjust how the door sits in its frame.

What affects the cost of security strike plate installation service

Door and frame material
Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
Extent of damage
A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
Adjustment or replacement
Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
Hardware quality
Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
Reinforcement level
A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
Number of doors
Several doors in one visit cost less per door than separate calls.

We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.

What you can expect from us

Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to South Pasadena.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Door Hardware locksmith work in South Pasadena, CA
Door Hardware Services from Big Daddy Car Key Replacement.

Advice worth knowing

  • Replace hollow-core exterior doors. No lock makes a weak door strong.
  • If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
  • Out-swinging doors should have hinges with non-removable pins or security studs.
  • Lubricate latches and hinges lightly once a year, and wipe away the excess.
  • Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
  • Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
  • Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
  • A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.

Why this is a job for a locksmith

Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.

How we work on every job

Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.

Questions to ask any locksmith

  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Get an itemized receipt showing labor, parts and the business details.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.

Before you call (562) 550-7206

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

Once the work is done

Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.

Customers who need security strike plate installation service often ask about these as well. Each can usually be handled in the same visit to South Pasadena.

Security Strike Plate Installation near South Pasadena

We provide the same security strike plate installation service in the communities around South Pasadena. See the main security strike plate installation page or the full list of service areas.

Security Strike Plate Installation in South Pasadena: frequently asked questions

Are longer strike plate screws really worth it?

Yes. Replacing short strike screws with three-inch screws into the stud, and fitting a heavier strike, is one of the cheapest and most effective ways to resist a kick-in.

How long does a door adjustment take?

Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.

Do you work on commercial doors as well?

Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.

Why do I have to push my door to lock it in South Pasadena?

The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.

How can I make my door harder to kick in?

Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.

Why does my door lock fine in summer but not winter?

Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.

Will the repair damage my door or paint?

We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.

Can you repair a door frame after a break-in?

Yes. We fit jamb repair and reinforcement kits that restore strength to a split frame, and replace damaged locks and strikes in the same visit.

Which parts of South Pasadena do you serve?

All of South Pasadena, including the Mission West district, the Fair Oaks corridor, Monterey Hills, and the Huntington Drive corridor, and addresses in ZIP code 91030.

How long does it take a locksmith to reach me in South Pasadena?

It depends on where the nearest technician is and on traffic along SR-110, Fair Oaks Avenue, or Mission Street. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.

Is there a travel charge for South Pasadena?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to South Pasadena, so you know the cost in advance.

How do I get a price?

Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.

Which areas do you cover?

We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.

Is Big Daddy Car Key Replacement a mobile locksmith?

Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.

Where is Big Daddy Car Key Replacement located?

Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.

Call Now (562) 550-7206Open 24 hours · mobile locksmith