Quick answer
Security Strike Plate Installation: Installing stronger strike plates with longer screws for added protection. Big Daddy Car Key Replacement provides security strike plate installation service in Willowbrook as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Security Strike Plate Installation
- Area
- Willowbrook, Los Angeles County, CA (90059, 90061, 90222)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Door Hardware Services
- Phone
- (562) 550-7206
On this page
- What security strike plate installation involves
- Who uses this service
- Signs you need security strike plate installation service
- Security Strike Plate Installation across Willowbrook
- What happens when you call
- Common situations in Willowbrook
- What our technicians bring
- A short glossary
- What affects the cost of security strike plate installation service
- Why Willowbrook customers choose Big Daddy
- Practical advice from our locksmiths
- Professional service compared with doing it yourself
- How we work on every job
- How to choose a locksmith you can trust
- What to have ready when you call
- After the visit
- Related locksmith services in Willowbrook
- Security Strike Plate Installation near Willowbrook
- Security Strike Plate Installation in Willowbrook: frequently asked questions
What security strike plate installation involves
Installing stronger strike plates with longer screws for added protection. The small strike plate supplied with most locks is held by short screws into thin door-jamb trim. A security strike is longer, made of heavier steel, and fastened with three-inch screws that reach the wall framing, so a kick has to break the stud, not just the trim.

Doors in Willowbrook deal with settling foundations, seasonal humidity, sun-baked frames and years of daily use. Our security strike plate installation service corrects the misalignment, wear and loose hardware that make doors hard to close or lock, and adds reinforcement where a door is weaker than it should be.
Who uses this service
Door hardware calls in Willowbrook come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.
This service is part of our door hardware services in Willowbrook.
Signs you need security strike plate installation service
These are the most common reasons customers in Willowbrook ask for security strike plate installation service:
- Your strike plate is held by short screws
- The jamb is cracked or has been repaired before
- You are installing a new deadbolt
- You want an inexpensive, meaningful upgrade
Security Strike Plate Installation across Willowbrook
Located in Los Angeles County, Willowbrook is an unincorporated community within our Central & South Los Angeles service area. Our security strike plate installation service reaches all of Willowbrook, including the Wilmington Avenue corridor, the Imperial Highway corridor, and the medical campus district, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP codes 90059, 90061, and 90222.
Willowbrook is an unincorporated community anchored by a growing medical campus and a major Metro transfer station, with older homes that benefit from rekeying and stronger door hardware.
Whether you are at home, at work, or stuck near Martin Luther King Jr. Community Hospital, Charles R. Drew University, Kenneth Hahn Plaza, the Willowbrook/Rosa Parks Metro station, or Earvin “Magic” Johnson Park, tell the dispatcher the nearest landmark and we will find you. Willowbrook is served by I-105, I-110, Wilmington Avenue, Imperial Highway, El Segundo Boulevard, and Central Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
What happens when you call
Describe the symptom
Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.
Inspect the whole opening
The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.
Find the root cause
Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.
Agree the repair and price
You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.
Make the repair
Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.
Test under real conditions
The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Willowbrook
- A latch has jammed and someone is stuck in a room.
- The door drifts open by itself because the latch no longer catches.
- The deadbolt only turns if you pull the door hard toward you.
- The top corner of the door rubs the frame and the paint is wearing through.
- A previous break-in left the jamb cracked around the strike.
- The back door swings outward and its latch is visible through the gap.
What our technicians bring
For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.
A short glossary
- Door wrap
- A metal plate that wraps the door edge around the lock to reinforce it against splitting.
- Bolt throw
- How far a deadbolt extends from the door edge. One inch is the standard for security.
- Strike plate
- The plate on the frame that receives the latch or bolt.
- Jamb
- The vertical part of the door frame that carries the hinges on one side and the strike on the other.
- Deadlatch
- A latch with a small plunger that stops it being pushed back with a card once the door is closed.
- Shim
- A thin spacer placed behind a hinge to adjust how the door sits in its frame.
- Latch
- The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
- Latch guard
- A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
What affects the cost of security strike plate installation service
- Extent of damage
- A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
- Number of doors
- Several doors in one visit cost less per door than separate calls.
- Adjustment or replacement
- Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
- Door and frame material
- Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
- Hardware quality
- Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
- Reinforcement level
- A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Willowbrook customers choose Big Daddy
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Willowbrook.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Practical advice from our locksmiths
- Replace hollow-core exterior doors. No lock makes a weak door strong.
- A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
- Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
- Out-swinging doors should have hinges with non-removable pins or security studs.
- If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
- Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
- Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
- Lubricate latches and hinges lightly once a year, and wipe away the excess.
Professional service compared with doing it yourself
Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.
How we work on every job
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Willowbrook
Customers who need security strike plate installation service often ask about these as well. Each can usually be handled in the same visit to Willowbrook.
- Door Lock Repair
Repairing lock cylinders, latches, strikes and internal mechanisms.
- Door Latch Repair
Fixing latches that do not catch, stick or fail to retract.
- Door Chain Installation
Installing door chains or secondary security locks.
- Door Reinforcement
Adding security plates, reinforced strike plates, latch guards and door wrap plates.
- Strike Plate Adjustment
Adjusting strike plates so doors latch and lock properly.
- Door Hardware Repair
Repairing the locks, latches, strikes, hinges and closers that make a door open, close and secure properly.
- Latch Guard Installation
Installing latch guards to protect against forced entry.
- Door Guard Installation
Installing flip guards, swing guards or security latches.
- Hinge Adjustment
Adjusting or replacing hinges so doors close correctly.
- Door Viewer & Peephole Installation
Installing peepholes or door viewers for added safety.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
Security Strike Plate Installation near Willowbrook
We provide the same security strike plate installation service in the communities around Willowbrook. See the main security strike plate installation page or the full list of service areas.
- Security Strike Plate Installation in Compton
- Security Strike Plate Installation in Athens
- Security Strike Plate Installation in Lynwood
- Security Strike Plate Installation in Westmont
- Security Strike Plate Installation in South Gate
- Security Strike Plate Installation in Gardena
- Security Strike Plate Installation in Huntington Park
- Security Strike Plate Installation in Cudahy
- Security Strike Plate Installation in Hawthorne
- Security Strike Plate Installation in Bell
- Security Strike Plate Installation in Paramount
- Security Strike Plate Installation in Lawndale
Security Strike Plate Installation in Willowbrook: frequently asked questions
Are longer strike plate screws really worth it?
Yes. Replacing short strike screws with three-inch screws into the stud, and fitting a heavier strike, is one of the cheapest and most effective ways to resist a kick-in.
Do you work on commercial doors as well?
Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.
Can door problems be fixed without replacing the lock?
Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.
Will the repair damage my door or paint?
We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.
Can you repair a door frame after a break-in?
Yes. We fit jamb repair and reinforcement kits that restore strength to a split frame, and replace damaged locks and strikes in the same visit.
How can I make my door harder to kick in?
Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.
Why does my door lock fine in summer but not winter?
Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.
Why do I have to push my door to lock it in Willowbrook?
The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.
Can you make car keys in Willowbrook?
Yes. We cut and program car keys on site anywhere in Willowbrook, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which parts of Willowbrook do you serve?
All of Willowbrook, including the Wilmington Avenue corridor, the Imperial Highway corridor, and the medical campus district, and addresses in ZIP codes 90059, 90061, and 90222.
Is there a travel charge for Willowbrook?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Willowbrook, so you know the cost in advance.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
