Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Security Strike Plate Installation in Lakewood, CA

For security strike plate installation service in Lakewood, one call brings a fully equipped mobile locksmith to your location, day or night. Installing stronger strike plates with longer screws for added protection.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Security Strike Plate Installation in Lakewood, CA by Big Daddy Car Key Replacement

Quick answer

Security Strike Plate Installation: Installing stronger strike plates with longer screws for added protection. Big Daddy Car Key Replacement provides security strike plate installation service in Lakewood as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Security Strike Plate Installation
Area
Lakewood, Los Angeles County, CA (90712, 90713, 90715)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Door Hardware Services
Phone
(562) 550-7206
On this page

About our security strike plate installation service

Installing stronger strike plates with longer screws for added protection. The small strike plate supplied with most locks is held by short screws into thin door-jamb trim. A security strike is longer, made of heavier steel, and fastened with three-inch screws that reach the wall framing, so a kick has to break the stud, not just the trim.

Security Strike Plate Installation in Lakewood, CA by Big Daddy Car Key Replacement
Security Strike Plate Installation in Lakewood: mobile service, carried out at your location.

Doors in Lakewood deal with settling foundations, seasonal humidity, sun-baked frames and years of daily use. Our security strike plate installation service corrects the misalignment, wear and loose hardware that make doors hard to close or lock, and adds reinforcement where a door is weaker than it should be.

Customers we serve in Lakewood

Door hardware calls in Lakewood come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.

This service is part of our door hardware services in Lakewood.

Signs you need security strike plate installation service

These are the most common reasons customers in Lakewood ask for security strike plate installation service:

  • Your strike plate is held by short screws
  • The jamb is cracked or has been repaired before
  • You are installing a new deadbolt
  • You want an inexpensive, meaningful upgrade

Security Strike Plate Installation across Lakewood

Lakewood is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. Our security strike plate installation service reaches all of Lakewood, including Lakewood Village, Mayfair, the Lakewood Center district, Lakewood Country Club Estates, and the Carson Park edge, as well as the streets in between. You do not need to bring anything to a shop. We serve the 90712, 90713, and 90715 ZIP codes.

Lakewood is the original postwar planned suburb, with thousands of similar 1950s homes whose original doors and hardware are now being rekeyed, repaired or replaced with modern deadbolts.

People call us from all over Lakewood, including the areas around Lakewood Center, the Lakewood Civic Center, Mayfair Park, and the neighboring Long Beach Airport. A landmark or cross street helps the technician reach you quickly. Technicians usually reach Lakewood by I-605, SR-91, I-405, Lakewood Boulevard, Bellflower Boulevard, and Del Amo Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.

How our security strike plate installation service works

  1. Describe the symptom

    Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.

  2. Inspect the whole opening

    The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.

  3. Find the root cause

    Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.

  4. Agree the repair and price

    You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.

  5. Make the repair

    Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.

  6. Test under real conditions

    The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.

On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Locksmith providing security strike plate installation service in Lakewood, California
Our technicians work from fully equipped vans throughout Lakewood.

Common situations in Lakewood

  • A previous break-in left the jamb cracked around the strike.
  • The back door swings outward and its latch is visible through the gap.
  • A latch has jammed and someone is stuck in a room.
  • The top corner of the door rubs the frame and the paint is wearing through.
  • The deadbolt only turns if you pull the door hard toward you.
  • The door drifts open by itself because the latch no longer catches.

Equipment and hardware on the van

For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.

A short glossary

Bolt throw
How far a deadbolt extends from the door edge. One inch is the standard for security.
Jamb
The vertical part of the door frame that carries the hinges on one side and the strike on the other.
Strike plate
The plate on the frame that receives the latch or bolt.
Latch guard
A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
Door wrap
A metal plate that wraps the door edge around the lock to reinforce it against splitting.
Latch
The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
Deadlatch
A latch with a small plunger that stops it being pushed back with a card once the door is closed.
Shim
A thin spacer placed behind a hinge to adjust how the door sits in its frame.

Cost factors for security strike plate installation service

Number of doors
Several doors in one visit cost less per door than separate calls.
Extent of damage
A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
Door and frame material
Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
Reinforcement level
A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
Hardware quality
Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
Adjustment or replacement
Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.

Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Lakewood. The technician confirms the figure before starting.

Why call Big Daddy Car Key Replacement

Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Lakewood.
Door Hardware locksmith work in Lakewood, CA
Door Hardware Services from Big Daddy Car Key Replacement.

Practical advice from our locksmiths

  • Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
  • Out-swinging doors should have hinges with non-removable pins or security studs.
  • Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
  • Lubricate latches and hinges lightly once a year, and wipe away the excess.
  • A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
  • Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
  • Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
  • If a door suddenly starts sticking, check for plumbing leaks or foundation movement.

Doing it yourself versus calling a professional

Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.

Our service standards

We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.

Choosing a locksmith: a short checklist

  • Get an itemized receipt showing labor, parts and the business details.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.

How to prepare for the visit

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

After the visit

Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.

Customers who need security strike plate installation service often ask about these as well. Each can usually be handled in the same visit to Lakewood.

Security Strike Plate Installation near Lakewood

We provide the same security strike plate installation service in the communities around Lakewood. See the main security strike plate installation page or the full list of service areas.

Security Strike Plate Installation in Lakewood: frequently asked questions

Are longer strike plate screws really worth it?

Yes. Replacing short strike screws with three-inch screws into the stud, and fitting a heavier strike, is one of the cheapest and most effective ways to resist a kick-in.

Can door problems be fixed without replacing the lock?

Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.

Will the repair damage my door or paint?

We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.

Why do I have to push my door to lock it in Lakewood?

The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.

Why does my door lock fine in summer but not winter?

Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.

How can I make my door harder to kick in?

Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.

Do you work on commercial doors as well?

Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.

How long does a door adjustment take?

Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.

Can you make car keys in Lakewood?

Yes. We cut and program car keys on site anywhere in Lakewood, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.

Do you have a locksmith shop in Lakewood?

We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Lakewood and the rest of the Gateway Cities area. All work is done at your location.

Are you open 24 hours in Lakewood?

Yes. We take calls and dispatch to Lakewood 24 hours a day, including weekends and holidays.

Is Big Daddy Car Key Replacement a mobile locksmith?

Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

How can I contact you other than by phone?

You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.

How do I get a price?

Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.

Call Now (562) 550-7206Open 24 hours · mobile locksmith