Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Security Strike Plate Installation in Pomona, CA

For security strike plate installation service in Pomona, one call brings a fully equipped mobile locksmith to your location, day or night. Installing stronger strike plates with longer screws for added protection.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Security Strike Plate Installation in Pomona, CA by Big Daddy Car Key Replacement

Quick answer

Security Strike Plate Installation: Installing stronger strike plates with longer screws for added protection. Big Daddy Car Key Replacement provides security strike plate installation service in Pomona as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Security Strike Plate Installation
Area
Pomona, Los Angeles County, CA (91766, 91767, 91768)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Door Hardware Services
Phone
(562) 550-7206
On this page

About our security strike plate installation service

Installing stronger strike plates with longer screws for added protection. The small strike plate supplied with most locks is held by short screws into thin door-jamb trim. A security strike is longer, made of heavier steel, and fastened with three-inch screws that reach the wall framing, so a kick has to break the stud, not just the trim.

Security Strike Plate Installation in Pomona, CA by Big Daddy Car Key Replacement
Security Strike Plate Installation in Pomona: mobile service, carried out at your location.

If you have to lift, push or slam a door to get it to lock, something is out of line. For security strike plate installation service in Pomona, call (562) 550-7206. A mobile technician diagnoses the opening, makes the repair on site and tests the door under normal use.

Who uses this service

Door hardware calls in Pomona come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.

This service is part of our door hardware services in Pomona.

Reasons to call for security strike plate installation service

These are the most common reasons customers in Pomona ask for security strike plate installation service:

  • Your strike plate is held by short screws
  • The jamb is cracked or has been repaired before
  • You are installing a new deadbolt
  • You want an inexpensive, meaningful upgrade

Security Strike Plate Installation across Pomona

Pomona is an incorporated city in Los Angeles County, part of the Pomona Valley area we cover every day. Customers anywhere in Pomona, including the Downtown Pomona Arts Colony, Lincoln Park, Phillips Ranch, Ganesha Hills, Westmont, and Wilton Heights, can have a mobile technician sent directly to them. That includes addresses in ZIP codes 91766, 91767, and 91768.

Pomona is the valley’s historic hub, with Victorian and Craftsman homes in Lincoln Park, two universities, the fairgrounds and a big industrial base, so nearly every locksmith specialty gets used here.

People call us from all over Pomona, including the areas around Fairplex and the LA County Fair, Cal Poly Pomona, Western University of Health Sciences, the Fox Theater Pomona, and Antique Row. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Pomona follows I-10, SR-60, SR-71, SR-57, Holt Avenue, and Garey Avenue. You get a realistic arrival estimate when you call.

How our security strike plate installation service works

  1. Describe the symptom

    Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.

  2. Inspect the whole opening

    The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.

  3. Find the root cause

    Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.

  4. Agree the repair and price

    You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.

  5. Make the repair

    Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.

  6. Test under real conditions

    The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.

On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Locksmith providing security strike plate installation service in Pomona, California
Our technicians work from fully equipped vans throughout Pomona.

Common situations in Pomona

  • The top corner of the door rubs the frame and the paint is wearing through.
  • The deadbolt only turns if you pull the door hard toward you.
  • The door drifts open by itself because the latch no longer catches.
  • A latch has jammed and someone is stuck in a room.
  • The back door swings outward and its latch is visible through the gap.
  • A previous break-in left the jamb cracked around the strike.

Tools, parts and hardware we carry

For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.

A short glossary

Strike plate
The plate on the frame that receives the latch or bolt.
Deadlatch
A latch with a small plunger that stops it being pushed back with a card once the door is closed.
Jamb
The vertical part of the door frame that carries the hinges on one side and the strike on the other.
Bolt throw
How far a deadbolt extends from the door edge. One inch is the standard for security.
Shim
A thin spacer placed behind a hinge to adjust how the door sits in its frame.
Latch
The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
Latch guard
A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
Door wrap
A metal plate that wraps the door edge around the lock to reinforce it against splitting.

Cost factors for security strike plate installation service

Adjustment or replacement
Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
Number of doors
Several doors in one visit cost less per door than separate calls.
Door and frame material
Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
Hardware quality
Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
Extent of damage
A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
Reinforcement level
A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.

Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Pomona. The technician confirms the figure before starting.

What you can expect from us

Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Door Hardware locksmith work in Pomona, CA
Door Hardware Services from Big Daddy Car Key Replacement.

Tips to avoid problems

  • Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
  • Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
  • If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
  • Lubricate latches and hinges lightly once a year, and wipe away the excess.
  • Out-swinging doors should have hinges with non-removable pins or security studs.
  • Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
  • A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
  • Replace hollow-core exterior doors. No lock makes a weak door strong.

Why this is a job for a locksmith

Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.

Our service standards

We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.

Choosing a locksmith: a short checklist

  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Get an itemized receipt showing labor, parts and the business details.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.

How to prepare for the visit

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

Once the work is done

Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.

Customers who need security strike plate installation service often ask about these as well. Each can usually be handled in the same visit to Pomona.

Security Strike Plate Installation near Pomona

We provide the same security strike plate installation service in the communities around Pomona. See the main security strike plate installation page or the full list of service areas.

Security Strike Plate Installation in Pomona: frequently asked questions

Are longer strike plate screws really worth it?

Yes. Replacing short strike screws with three-inch screws into the stud, and fitting a heavier strike, is one of the cheapest and most effective ways to resist a kick-in.

How can I make my door harder to kick in?

Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.

Do you work on commercial doors as well?

Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.

Can door problems be fixed without replacing the lock?

Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.

How long does a door adjustment take?

Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.

Will the repair damage my door or paint?

We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.

Can you repair a door frame after a break-in?

Yes. We fit jamb repair and reinforcement kits that restore strength to a split frame, and replace damaged locks and strikes in the same visit.

Why do I have to push my door to lock it in Pomona?

The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.

Which parts of Pomona do you serve?

All of Pomona, including the Downtown Pomona Arts Colony, Lincoln Park, Phillips Ranch, and Ganesha Hills, and addresses in ZIP codes 91766, 91767, and 91768.

Can you make car keys in Pomona?

Yes. We cut and program car keys on site anywhere in Pomona, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.

Is there a travel charge for Pomona?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Pomona, so you know the cost in advance.

Can I book an appointment in advance?

Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.

How do I get a price?

Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.

What are your hours?

We are open 24 hours a day, seven days a week, including weekends and holidays.

Do you only make car keys?

No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.

Call Now (562) 550-7206Open 24 hours · mobile locksmith