Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Security Strike Plate Installation in Azusa, CA

Need security strike plate installation service in Azusa? Big Daddy Car Key Replacement sends a mobile locksmith to your home, business or vehicle, 24 hours a day. Installing stronger strike plates with longer screws for added protection.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Security Strike Plate Installation in Azusa, CA by Big Daddy Car Key Replacement

Quick answer

Security Strike Plate Installation: Installing stronger strike plates with longer screws for added protection. Big Daddy Car Key Replacement provides security strike plate installation service in Azusa as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Security Strike Plate Installation
Area
Azusa, Los Angeles County, CA (91702)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Door Hardware Services
Phone
(562) 550-7206
On this page

About our security strike plate installation service

Installing stronger strike plates with longer screws for added protection. The small strike plate supplied with most locks is held by short screws into thin door-jamb trim. A security strike is longer, made of heavier steel, and fastened with three-inch screws that reach the wall framing, so a kick has to break the stud, not just the trim.

Security Strike Plate Installation in Azusa, CA by Big Daddy Car Key Replacement
Security Strike Plate Installation in Azusa: mobile service, carried out at your location.

If you have to lift, push or slam a door to get it to lock, something is out of line. For security strike plate installation service in Azusa, call (562) 550-7206. A mobile technician diagnoses the opening, makes the repair on site and tests the door under normal use.

Customers we serve in Azusa

Door hardware calls in Azusa come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.

This service is part of our door hardware services in Azusa.

When you need security strike plate installation service

If any of the following sounds familiar, security strike plate installation service is likely what you need:

  • Your strike plate is held by short screws
  • The jamb is cracked or has been repaired before
  • You are installing a new deadbolt
  • You want an inexpensive, meaningful upgrade

Security Strike Plate Installation across Azusa

Azusa is an incorporated city in Los Angeles County, part of the San Gabriel Valley area we cover every day. We cover every part of Azusa, including Downtown Azusa, Rosedale, the Foothill Boulevard corridor, and the Arrow Highway corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP code 91702.

Azusa sits at the mouth of San Gabriel Canyon with a university, a newer master-planned community and older central neighborhoods, so student lockouts and new-home lock upgrades are both typical.

Whether you are at home, at work, or stuck near Azusa Pacific University, the Azusa Downtown Metro station, the San Gabriel Canyon gateway, or the Rosedale community, tell the dispatcher the nearest landmark and we will find you. Azusa is served by I-210, Azusa Avenue, Foothill Boulevard, Arrow Highway, and Citrus Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.

Our security strike plate installation process, step by step

  1. Describe the symptom

    Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.

  2. Inspect the whole opening

    The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.

  3. Find the root cause

    Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.

  4. Agree the repair and price

    You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.

  5. Make the repair

    Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.

  6. Test under real conditions

    The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.

On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Locksmith providing security strike plate installation service in Azusa, California
Our technicians work from fully equipped vans throughout Azusa.

Common situations in Azusa

  • The door drifts open by itself because the latch no longer catches.
  • The back door swings outward and its latch is visible through the gap.
  • A latch has jammed and someone is stuck in a room.
  • The top corner of the door rubs the frame and the paint is wearing through.
  • A previous break-in left the jamb cracked around the strike.
  • The deadbolt only turns if you pull the door hard toward you.

Tools, parts and hardware we carry

For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.

Terms worth knowing

Jamb
The vertical part of the door frame that carries the hinges on one side and the strike on the other.
Latch guard
A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
Door wrap
A metal plate that wraps the door edge around the lock to reinforce it against splitting.
Bolt throw
How far a deadbolt extends from the door edge. One inch is the standard for security.
Shim
A thin spacer placed behind a hinge to adjust how the door sits in its frame.
Strike plate
The plate on the frame that receives the latch or bolt.
Latch
The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
Deadlatch
A latch with a small plunger that stops it being pushed back with a card once the door is closed.

What affects the cost of security strike plate installation service

Extent of damage
A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
Hardware quality
Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
Door and frame material
Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
Adjustment or replacement
Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
Number of doors
Several doors in one visit cost less per door than separate calls.
Reinforcement level
A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.

Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Azusa. The technician confirms the figure before starting.

Why call Big Daddy Car Key Replacement

A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Door Hardware locksmith work in Azusa, CA
Door Hardware Services from Big Daddy Car Key Replacement.

Tips to avoid problems

  • Lubricate latches and hinges lightly once a year, and wipe away the excess.
  • If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
  • A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
  • Replace hollow-core exterior doors. No lock makes a weak door strong.
  • Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
  • Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
  • Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
  • Out-swinging doors should have hinges with non-removable pins or security studs.

Doing it yourself versus calling a professional

Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.

What we commit to

We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.

How to choose a locksmith you can trust

  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Get an itemized receipt showing labor, parts and the business details.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.

What to have ready when you call

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

After the visit

Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.

Customers who need security strike plate installation service often ask about these as well. Each can usually be handled in the same visit to Azusa.

Security Strike Plate Installation near Azusa

We provide the same security strike plate installation service in the communities around Azusa. See the main security strike plate installation page or the full list of service areas.

Security Strike Plate Installation in Azusa: frequently asked questions

Are longer strike plate screws really worth it?

Yes. Replacing short strike screws with three-inch screws into the stud, and fitting a heavier strike, is one of the cheapest and most effective ways to resist a kick-in.

Will the repair damage my door or paint?

We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.

Can you repair a door frame after a break-in?

Yes. We fit jamb repair and reinforcement kits that restore strength to a split frame, and replace damaged locks and strikes in the same visit.

How can I make my door harder to kick in?

Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.

Why does my door lock fine in summer but not winter?

Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.

Why do I have to push my door to lock it in Azusa?

The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.

Do you work on commercial doors as well?

Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.

Can door problems be fixed without replacing the lock?

Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.

Can you make car keys in Azusa?

Yes. We cut and program car keys on site anywhere in Azusa, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.

Is there a travel charge for Azusa?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Azusa, so you know the cost in advance.

How long does it take a locksmith to reach me in Azusa?

It depends on where the nearest technician is and on traffic along I-210, Azusa Avenue, or Foothill Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.

Can I book an appointment in advance?

Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.

Do you only make car keys?

No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.

Where is Big Daddy Car Key Replacement located?

Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.

Which areas do you cover?

We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.

Call Now (562) 550-7206Open 24 hours · mobile locksmith