Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Security Strike Plate Installation in Santa Paula, CA

Big Daddy Car Key Replacement provides security strike plate installation service throughout Santa Paula. We come to you at any hour with the tools and parts to finish the job on site. Installing stronger strike plates with longer screws for added protection.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Security Strike Plate Installation in Santa Paula, CA by Big Daddy Car Key Replacement

Quick answer

Security Strike Plate Installation: Installing stronger strike plates with longer screws for added protection. Big Daddy Car Key Replacement provides security strike plate installation service in Santa Paula as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Security Strike Plate Installation
Area
Santa Paula, Ventura County, CA (93060)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Door Hardware Services
Phone
(562) 550-7206
On this page

About our security strike plate installation service

Installing stronger strike plates with longer screws for added protection. The small strike plate supplied with most locks is held by short screws into thin door-jamb trim. A security strike is longer, made of heavier steel, and fastened with three-inch screws that reach the wall framing, so a kick has to break the stud, not just the trim.

Security Strike Plate Installation in Santa Paula, CA by Big Daddy Car Key Replacement
Security Strike Plate Installation in Santa Paula: mobile service, carried out at your location.

Doors in Santa Paula deal with settling foundations, seasonal humidity, sun-baked frames and years of daily use. Our security strike plate installation service corrects the misalignment, wear and loose hardware that make doors hard to close or lock, and adds reinforcement where a door is weaker than it should be.

Who uses this service

Door hardware calls in Santa Paula come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.

This service is part of our door hardware services in Santa Paula.

Signs you need security strike plate installation service

These are the most common reasons customers in Santa Paula ask for security strike plate installation service:

  • Your strike plate is held by short screws
  • The jamb is cracked or has been repaired before
  • You are installing a new deadbolt
  • You want an inexpensive, meaningful upgrade

Security Strike Plate Installation across Santa Paula

Located in Ventura County, Santa Paula is an incorporated city within our service area. Our security strike plate installation service reaches all of Santa Paula, including Historic Downtown Santa Paula, the Oaks, the Harvard Boulevard corridor, the airport district, and East Area One, as well as the streets in between. You do not need to bring anything to a shop. We serve the 93060 ZIP code.

Santa Paula, the “Citrus Capital of the World,” has a well-preserved Main Street and Victorian and Craftsman homes, where storefront mortise locks and vintage residential hardware need knowledgeable repair.

People call us from all over Santa Paula, including the areas around Santa Paula Airport and the Aviation Museum, the California Oil Museum, the downtown Main Street murals, the Santa Paula train depot, and Steckel Park. A landmark or cross street helps the technician reach you quickly. Technicians usually reach Santa Paula by SR-126, SR-150, Main Street, Harvard Boulevard, Peck Road, and Telegraph Road. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.

What happens when you call

  1. Describe the symptom

    Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.

  2. Inspect the whole opening

    The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.

  3. Find the root cause

    Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.

  4. Agree the repair and price

    You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.

  5. Make the repair

    Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.

  6. Test under real conditions

    The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.

When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Locksmith providing security strike plate installation service in Santa Paula, California
Our technicians work from fully equipped vans throughout Santa Paula.

Situations we handle regularly

  • A previous break-in left the jamb cracked around the strike.
  • The back door swings outward and its latch is visible through the gap.
  • The door drifts open by itself because the latch no longer catches.
  • The deadbolt only turns if you pull the door hard toward you.
  • The top corner of the door rubs the frame and the paint is wearing through.
  • A latch has jammed and someone is stuck in a room.

Tools, parts and hardware we carry

For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.

Terms worth knowing

Strike plate
The plate on the frame that receives the latch or bolt.
Shim
A thin spacer placed behind a hinge to adjust how the door sits in its frame.
Door wrap
A metal plate that wraps the door edge around the lock to reinforce it against splitting.
Deadlatch
A latch with a small plunger that stops it being pushed back with a card once the door is closed.
Bolt throw
How far a deadbolt extends from the door edge. One inch is the standard for security.
Latch guard
A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
Latch
The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
Jamb
The vertical part of the door frame that carries the hinges on one side and the strike on the other.

What affects the cost of security strike plate installation service

Reinforcement level
A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
Extent of damage
A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
Adjustment or replacement
Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
Number of doors
Several doors in one visit cost less per door than separate calls.
Hardware quality
Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
Door and frame material
Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.

We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.

Why call Big Daddy Car Key Replacement

A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Door Hardware locksmith work in Santa Paula, CA
Door Hardware Services from Big Daddy Car Key Replacement.

Tips to avoid problems

  • Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
  • Lubricate latches and hinges lightly once a year, and wipe away the excess.
  • Out-swinging doors should have hinges with non-removable pins or security studs.
  • Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
  • If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
  • A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
  • Replace hollow-core exterior doors. No lock makes a weak door strong.
  • Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.

Professional service compared with doing it yourself

Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.

What we commit to

Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.

Questions to ask any locksmith

  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Get an itemized receipt showing labor, parts and the business details.

What to have ready when you call

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

Aftercare and records

Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.

Customers who need security strike plate installation service often ask about these as well. Each can usually be handled in the same visit to Santa Paula.

  • Door Guard Installation

    Installing flip guards, swing guards or security latches.

  • Latch Guard Installation

    Installing latch guards to protect against forced entry.

  • Hinge Adjustment

    Adjusting or replacing hinges so doors close correctly.

  • Door Reinforcement

    Adding security plates, reinforced strike plates, latch guards and door wrap plates.

  • Door Lock Repair

    Repairing lock cylinders, latches, strikes and internal mechanisms.

  • Door Hardware Repair

    Repairing the locks, latches, strikes, hinges and closers that make a door open, close and secure properly.

  • Door Alignment for Locks

    Fixing lock issues caused by sagging doors, shifted frames or misalignment.

  • Strike Plate Adjustment

    Adjusting strike plates so doors latch and lock properly.

  • Door Viewer & Peephole Installation

    Installing peepholes or door viewers for added safety.

  • Door Latch Repair

    Fixing latches that do not catch, stick or fail to retract.

  • Mailbox Lock Replacement

    Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.

  • High Security Locks

    Locks engineered to resist picking, bumping, drilling and unauthorized key copying.

  • Lock Rekey

    Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.

  • Commercial Door Hardware

    Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.

  • House Lockout

    Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.

Security Strike Plate Installation near Santa Paula

We provide the same security strike plate installation service in the communities around Santa Paula. See the main security strike plate installation page or the full list of service areas.

Security Strike Plate Installation in Santa Paula: frequently asked questions

Are longer strike plate screws really worth it?

Yes. Replacing short strike screws with three-inch screws into the stud, and fitting a heavier strike, is one of the cheapest and most effective ways to resist a kick-in.

How long does a door adjustment take?

Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.

How can I make my door harder to kick in?

Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.

Will the repair damage my door or paint?

We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.

Can you repair a door frame after a break-in?

Yes. We fit jamb repair and reinforcement kits that restore strength to a split frame, and replace damaged locks and strikes in the same visit.

Why do I have to push my door to lock it in Santa Paula?

The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.

Why does my door lock fine in summer but not winter?

Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.

Do you work on commercial doors as well?

Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.

Can you make car keys in Santa Paula?

Yes. We cut and program car keys on site anywhere in Santa Paula, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.

Do you have a locksmith shop in Santa Paula?

We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Santa Paula and the surrounding communities. All work is done at your location.

Is there a travel charge for Santa Paula?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Santa Paula, so you know the cost in advance.

How can I contact you other than by phone?

You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.

How do I get a price?

Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.

What are your hours?

We are open 24 hours a day, seven days a week, including weekends and holidays.

Is Big Daddy Car Key Replacement a mobile locksmith?

Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.

Call Now (562) 550-7206Open 24 hours · mobile locksmith